CAMVATE FEELWORLD FW568 V2 5.5 inch DSLR Camera Field Monitor with Waveform LUTs Video Peaking Focus Assist Small Full HD 1920x1152 IPS with 4K HDMI 8

Note: Choose New is FW568 V2 with Waveform, LUTs, 1920x1152 resolution; If You Choose Used Version, It Is the FW568 without Waveform, LUTs Version, 1920x1080 resolution

Let Your Video Shooting Become Easier

FEELWORLD has been committed to providing the comprehensive broadcast monitoring and solutions for the professional filmmakers. When you’ve put together rigs made up of powerful equipment, you want to be able to see shots that so much work has now gone into getting to that point. As a filmmaker you need to pay special attention to the visual aspect in order to capture every moment of emotion. It’s not easy to evaluate your shot solely through your camera’s built-in monitor, especially if the entire unit is constantly rotating on a gimbal/ stabilizer, the camera on crane rig jib, One of the biggest issues when you are doing low-angle/ high angle shot is monitoring what you’re shooting. FEELWORLD monitor is ideal tool for you to monitor the scene since you can install it where you can conveniently see it.

Compatible Battery: Sony F970, F960, F950,F930, F770, F750, F730, F570, F550, F530, series and Canon LP-E6 (Note battery not include, need purchase sperate)

FAQ:

1. Can't turn on the monitor

Make sure to use the standard 12V 1.5A power adapter to connect the monitor. If power is supplied by battery, please check if the battery is fully charged.

2.Have noise during recording

Long press “<“ button and turn down volume to near zero, can aviod have not nosie during recording. Long press ">" is increase the volume.

3.The monitor display " no signal"

1）Try another HDMI cable.

2）And please try to connect monitor HDMI to your computer, try if the monitor have signal?

3）Change the camera output singal, confirm the monitor input signal whether support the camera output signal.

4. The monitor display "Play and Slide show" when you coonect the HDMI signal format

It is need setting your camera. You need to switch on ‘secondary monitor‘ in the HDMI output settings and switch off ‘auto resolution’ you then need to pair ‘monitor resolution’ with ‘record resolution, and it is work.

FEELWORLD FW568 Update to FW568 V2 Version with Waveform and 3D LUT

Note: Choose New is FW568 V2 with Waveform, LUTs, 1920x1152 resolution; If You Choose Used Version, It Is the FW568 without Waveform, LUTs Version, 1920x1080 resolution

Accurately expose and focus every shot.

More detail about these features, you can see the video.

More Detail about FW568

Display Spec.

Input/ Output

General

Package Include